PolyX PM30

A world-first combination of foam and bubbles for exeptional insulation performance.

Double sided foil with fire retardent XPE foam between double layered bubbles for triple the strength efficiency and thermal break.

PolyX PM30 (Multi) is a premium thernal reflective insulation solution which utilises a unique combination of bubbles and foam. PM30™ Multi provides a Thermal break foam between the bubble layers for added insulaton from heat, cold and noise. This thermal break also acts as a thermal break to stop heat transferring from the insulation to the building’s structure.

A 18 microns thick aluminum foil with reinforced net and aluminum foil on bottom complete this high performance insulation solution.

Coming with a 15 year warranty, PM30 has a core of thermal break fire retardant XPE foam covered by thermo cellular flame retardant double bubbles and topped with high performance low emissivity copper antiglare. 

With class topping insulation performance and long-lasting durability, there’s a reason PM30 is preferred by commercial, industrial and residential solutions that really want to reduce their air-conditioning costs and dampen noise pollution as much as possible.

At a Glance

  • Reflect 95%-97% radiant heat
  • Best Performance
  • Heps to achieve 6 star rating in residential buildings
  • 15 year warranty
  • Safe and easy to install with no PPE
  • Delivers easy, cost effective section J solutions for roofs, ceiling, walls, floors
  • Water Proof
  • Reduces handling, storage, transport costs
  • Complies with thermal break insulation requirements

Call For a Quote:

1300 669 285

Is PolyX PM30 compliant in all states?

Yes, PolyX PM30 meets all relevant Australian regulations and standards in all states.

PM30 (Multi) complies with AS/NZS 4859 1&2 2018. Thermal resistance measurement: 0.221m2 K/W. Reflective performances of PM30(tested to ASTM E 408): Aluminum silver side = 97%, Copper antiglare side = 95% reflection of radiant heat.

Why choose PolyX PM30?

PolyX PM30 is chosen by architects, roofers, builders and homeowners who are after the highest performance insulation solution. PM30 is second to only the PolyX PU24 with regards to the overall performance. 

What is the thickness of PolyX PM30?

Total nominal thickness = 9mm.

What R-Value can PolyX PM30 achieve?

PM30 (Multi) adds to a Total R-Value (system R value). The effective R value in a system depends on the installation and environmental conditions. The R-Value may be affected or reduced due to dust on upward facing surfaces or as a result of ventilation.

PM30 (Multi) product can achieve several Total R-Values depending on the installation method, cavity depth, cavity design and other building components used in the system. For full details about PM30 R-Values and building systems range for roofs, ceilings, walls and floors kindly contact to PolyX Global PtyLtd authorized dealersagents.

Total R-Value Example A:
Roof structure Components:

Total R-Value Example B:
Roof structure Components:

  • Outside air film (temperature 36°C)
  • Outside air film (temperature 12°C)
  • Commercial Metal Roof (1° to 5° slope)
  • Commercial Metal Roof (1° to 5° slope)
  • Sealed 30mm reflective airspace
  • Sealed 30mm reflective airspace
  • PM30 (Multi) Reflective Insulation Unventilated
  • PM30 (Multi) Reflective Insulation
  • 900mm reflective airspace Suspended 13mm
  • Unventilated 900mm reflective airspace
  • plaster or gypsum board ceiling
  • Suspended 13mm plaster or gypsum board ceiling
  • Indoor air film (temperature 24°C)
  • Indoor air film (temperature 18°C)

Total R-Value = Rt 4.37m2xK/w (heat flow down) Calculation ref: JMF 334r0.32

Total R-Value = Rt 1.41 m2xK/w (heat flow up) Calculation ref: JMF 334r0.32


For full details about PM30 (Multi) R-Values and building systems range for roofs, ceilings, walls and floors kindly contact us to discuss your requirements.

PolyX PM30 Specifications
Thickness (nominal) mm 9 to 12
Bubbles Diameter mm 9/10
Emittance (ASTM) % 3 to 5
Reflectivity (ASTM) % 95 to 97
Foil thickness μ 7 to 18
Foil Purity % >99
Weight (nominal) gsm/m² 430
Standard Roll Size m X m 1.35m X 22.23m
Effective Coverage 30
Standard Roll Weight (Gross) kg 12.90
Roll Diameter mm 550 to 730
Fire Retardant Yes
Reinforced Net Yes
Heavy Duty Formulated Optional
Anti-Corrosion Coating Optional
Property PolyX TM PM30
Water Vapor Transmission (WVTR) Low
Dimension Changes Low
Product Shrinkage Low
Thermal Stability High
Wet Lamination Strength High
Dry Lamination Strength High
Surface Corrosion Development Low
Fungus and Bacteria Resistance High
Fire Hazard Properties Low
Surface Flame Spread Low
Mean time to Ignition Low
Noise Reduction High
Tensile Strength High
Puncture Strength High
**Optional Reinforced Net
PolyX PM30 Installation Requirements

To be able to accomplish a specific R Value, please follow PolyX Global’s application installation guide as demonstrated in PolyX Global application guide book.

PolyX PM30 Brochure

Download the detailed brochure.

Client Testimonials

PolyX Global
Based on 4 reviews
powered by Google
02:59 27 Apr 22
I'm a roofer that has been struggling to source insulation since COVID. PolyX has literally saved my business! not only have they been supplying me NEXT DAY thermal reflective insulation (which is SO much easier and faster to install then bulk insulation), but they have also worked with me to help me win some big contracts! Big thanks to the team for holding my hand. You have changed my roofing business!
Helen EnglezosHelen Englezos
23:24 04 Feb 22
Garry BrewsterGarry Brewster
04:49 24 Jun 20
staff are very helpful,and products are at top quality
cheryl pintleycheryl pintley
06:54 31 May 18

Contact Us

Unit 12/49 – 63 Victoria St Smithfield NSW 2164

© 2022 PolyX Global. Digital Marketing by SureTech